NEXCONEC ODF Rotary 1U panel is made of plastic ABS material and cold rolled steel pivotal bracket. An innovative high-density pivot panel designed to accept up to 48 SC simplex footprint adapters. The panel can pivot by up to 110° to allow easy access during installation or rework with no disturbance of the existing cable or fibers.

Nexconec High-Density 1U Rotary panel fiber is designed to accept up to 48 SC Simplex footprint adapters. Angled adapters route exiting patch cords directly into the cabinet side management. This innovative 1U high density pivot panel can pivot up to 90° and this gives an easy access and a smooth installation or rework that guarantees no disturbance to existing connections.

Nexconec sliding patch panel accepts 48 adapters FC or ST within 2U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 48 adapters SC Duplex or LC Quad within 2U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 48 adapters SC Simplex or LC Duplex within 2U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 24 adapters FC or ST within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 24 adapters SC Simplex or LC Duplex within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 24 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 12 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec Interchangeable Front adapter plate and sliding patch panel permit stock reduction with these 2 parts constructions. Increased flexibility with 1 chassis in stock for all loading configuration and fiber counts within 1U. Attach the suitable front panel as per requirements. The panel can also be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

NEXCONEC® 2U Patching Panel is designed with utmost precision and durability to provide housing for connections of an incoming preterm or trunk from the rear of the panel to patch cords on the front. Its open frame high-density design ensures quick and easy installation as well as enables accommodation of up to 288FO with LC. This patching panel comes with 2 rear bars (Included in the package), Standard size rear bar with 206mm Depth + Short size rear bar with 156mm depth, allowing you to customize your setup according to your specific requirements.

Nexconec Breakout Patching Panel is designed to provide housing for connections from an incoming preterm or trunks from the rear of the panel to patch cords on the front. The Open frame allows for quick and easy installation. The Open frame allows for quick and easy installation. It accepts up to 144FO with LC.

Nexconec Breakout Patching Panel is designed to provide housing for connections from an incoming preterm or trunks from the rear of the panel to patch cords on the front. The Open frame allows for quick and easy installation. It accepts up to 96FO with LC.

Nexconec Breakout Patching Panel is designed to provide housing for connections from an incoming preterm or trunks from the rear of the panel to patch cords on the front. The Open frame allows for quick and easy installation. It accepts up to 72FO with LC.

Nexconec Breakout Patching Panel is designed to provide housing for connections from an incoming preterm or trunks from the rear of the panel to patch cords on the front. The Open frame allows for quick and easy installation. It accepts up to 48FO with LC.

Nexconec High Density 96 Fibers 1U Breakout Fiber Patch Panel is designed to connect 40G QSFP ports with MTP/MPO fiber cables, mapping to the back of the panel, then breaking out as 48x 10G on the front panel with LC fiber cables. All breakout panels meet the requirements of TIA/EIA, IEC standards.

Nexconec High Density MTP/MPO to LC breakout Patch Panel offers an expandable deployment, for implementations in 40G/100G networks, in the meantime, providing greater protection to the installed patch cords in main, horizontal and equipment area of data center. Up to 144 Fibers in only 1U space.

Nexconec LGX modular keystone jack plate is specifically designed to fit its 1U HD sliding and fixed panel which provides the great flexibility to installer to build hybrid network with both fiber and copper connections. This LGX Module keystone jack plate can adapt to all categories of Nexconec keystones jacks which are fully compliant with ANSI/TIA/EIA 568A-B.2.2001, ISO/IEC11801:2002 and EN50173-2 standards.

This versatile retrofit bracket enables the integration of standard LGX Plates and Modules into existing connector housing series racks and wall mount products. By utilizing this bracket, you can seamlessly upgrade your current Fiber Distribution Unit (FDU) with NEXCONEC® products, offering a cost-effective solution without sacrificing connection quality.

The MPO adapter plates are made to fit all Nexconec LGX fiber management solutions, including rack mount patch panels and wall mount boxes, supporting MTP/MPO for high density solutions. This MPO adapter plate can accommodate up to 8 or 12 MPO adapters with options of key-up to key-down, or key-up to key-up, which offers the flexibility to the MTP/MPO trunk to adapts different installation requirements with various polarities. The recessed adapters mounted in the plate gives the better bending radius when routing the MTP/MPO trunks cables. Each MPO fiber adapter plate comes with protective caps made of polycarbonate to prevent dust and debris from entering.