FIBER TESTING & CLEANING

NEXCONEC one click cleaners are mechanical cleaning tools designed to clean fiber optic connectors residing in an adapter or faceplate and unmated connectors. The NEXCONEC one click cleaners use a novel dry cleaning strand to gently sweep and lift away dust and residues from the connector end face.

NEXCONEC one click cleaners are mechanical cleaning tools designed to clean fiber optic connectors residing in an adapter or faceplate and unmated connectors. The NEXCONEC one click cleaners use a novel dry cleaning strand to gently sweep and lift away dust and residues from the connector end face.

NEXCONEC One-Click Cleaner MPO is a high-performance device designed for cleaning the ferrule end faces of MTP/MPO connectors. This tool cleans the fiber end face without the use of alcohol, cleaning all 12 fibers at once.

NEXCONEC cassette type cleaners are mechanical cleaning tools designed to clean fiber optic connectors, which are made with either 2.5mm or 1.25mm ceramic ferrule. The NEXCONEC cassette type cleaners use a dry cleaning strand to gently sweep and lift away dust.

NEXCONEC cassette type cleaners are mechanical cleaning tools designed to clean fiber optic connectors which are MT ferrules, cleans connectors MTP/MPO flat and angled with guide pins and no pins. The NEXCONEC cassette type cleaners use a dry cleaning strand to gently sweep and lift away dust.

The fiber visual fault locator VFL-MINI provides efficient visible light at low cost to identify the fiber break points, fiber cracking splicing and bending as a necessary checking tools to the tools sets. It checks out the OTDR dead zone working as complimentary for the OTDR or only helps to identify the fibers in optical network during or after its installation or splicing.

The NEXCONEC® Dead Zone Eliminator establishes a connection with the OTDR and the link that is being tested, with the aim of evaluating the link's attenuation and the reflectance of the connection at the near end. This dead zone is provided in a robust, compact plastic casing, ideal for use in a rugged environment.

NEXCONEC handheld power meter is a full-function optical power meter, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with NXOLS201A optical light source, it offers a quick and accurate testing solution on both SM and MM fibers.
Compared with usual power meters, the NXOPM101A has more great functions/features of automatic wavelength identification and switching, as well as intelligent backlight control. Also this type has features of good appearance, good touch feeling and considerate humanization design.

NEXCONEC handheld light source is designed to match NXOPM101A, it not only can provide stable out power, but also it combined usage with NXOPM101A, they can realize automatic wavelength identification and automatic frequency identification. Also the NXOLS201A has features of good appearance, good touch feeling and considerate humanization design.

NEXCONEC Portable Inspection Microscope is the upgraded version, which provides network installer with high performance fiber inspection solutions. The whole set includes a digital probe, the monitor with the capability to inspect/record/file the data of fiber end face from assorted connectors.
This portable inspector can check the end face of pigtail and patch cord, and also capable of inspecting the connector end face through adapter which is already mounted on the patch panel, wall box without unplug the pigtail or patch cord from the other end.

NEXCONEC Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without interrupting the current service. The fiber identifier recognizes modulation like, 270Hz, 1KHz and 2KHz with continuous audible tone. There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0. This OFI is powered by 2 pcs very normal AAA batteries.

The Miller CFS-3 Fiber Optic Stripper, with 3-hole designed to precisely remove 1.6mm to 3mm fiber jacket, 600 to 900-micron buffer and 250-micron acrylate without scratching or nicking the fiber. Factory-set blade notches require no adjustment. A stripping guide on the handle is convenient for fast operation.

Nexconec high performance optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.