Skip to Content

FIBER MANAGEMENT ACCESSORIES

1U FIBER STORAGE SLIDING PANEL - STOP01
Nexconec 1U fiber cable storage sliding panel, mounted on 19” network racks. This slide-out tray fiber cable storage patch panel could make your fiber cable management neat and professional in the telecommunication room, data centers to storage excess fibers and cables.
Easy front access with inner cable management spools which provides protection and coiling of the excess lengths of the patch cords.

0.0 EGP
1U RETROFIT FRONT MANAGER - FM-SPP
The NEXCONEC® 1U Retrofit Front Manager is a comprehensive accessory add-on solution meticulously designed for efficient cable management. This universal 19” front manager seamlessly fits with all 1U fixed frames or sliding panels and mounts in the same unit space without consuming extra rack space. Intelligently functioning as an integral component in streamlining and organizing cables.
0.0 EGP
FIBER SPLICE TRAY - FSP01
Nexconec’s fibre splice tray is designed to safely splice 12 or 24 individual fibers which can be installed in rack mount patch panels, wall mount enclosures, terminal box or distribution unit. The stackable fiber cassettes provide security for fusion splicing and can be used with different cable options. The tray incorporates clamps to secure loose tubes and pigtails on entry and exit.
0.0 EGP
FIBER MANAGER SPOOL - FSP02
Nexconec’s fiber cable management ring manages fiber slack in all different type of rack and wall mount enclosures. Fiber retention tabs maintain minimum bend radius control, while rounded edges eliminate the risk of snagging and stress.
Designed to accommodate different cable diameters of up to 3mm, this Fiber Slack Management Spool can be split into half to accommodate different fiber routing as well be stacked together thru a simple snap-in.
0.0 EGP
FIBER SPLICE TRAY - FSP03
Nexconec splice tray is designed to splice 12 individual fibers which can be installed in rack mount patch panels, all mount enclosures, terminal box or distribution unit. The splice trays provide security for fusion splicing and can be used with different cable options. The splice tray is supplied with rigid plastic cover to protect the splice and fibers.
0.0 EGP
FIBER TRANSITION BREAKOUT UNIT - TRBR01
Nexconec Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 144Fo.
0.0 EGP
LARGE FIBER TRANSITION BREAKOUT UNIT - TRBR03
NEXCONEC® Large Fiber Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 576FO (Up to 24 mini flex tubes of 5mm).
0.0 EGP
MINI FIBER TRANSITION BREAKOUT UNIT - TRBR04
NEXCONEC® Mini Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 4 Corrugated tubes.
0.0 EGP
1U SIDE MANAGER GUIDE - 1UGD01
Nexconec fiber management guide are designed to route and protect the bending radius of the patch cords.
This accessory can be retrofitted to any 1U panel without removing the products already installed underneath.

0.0 EGP
1U REDUCER BRACKETS - 1UBRK21
Reducer bracket allows rack mount equipment designed for 19" (483 mm) equipment to be properly installed into 21" racks.
0.0 EGP
2U MINI OVERHEAD BRACKETS - 2UBRK01
Nexconec mini overhead brackets are designed to mount in overhead rails. This accessory helps to create extra space within datacenter to install patch panels without a cabinet. Special screws mounting provides quick and easy installation.
0.0 EGP
FIBER SPLICE PROTECTOR SLEEVES - FSPLxx
Nexconec splice protector sleeve is specifically made to accommodate the bare fibers when fusion splicing. The different lengths of splice protectors offer the flexibility to fiber optic network installers to adapt the variant of splice trays, splice holders and in designing optical modules.
The strength member made with 1.0mm in diameter of stainless steel provides the robust holding to the fibers. The Nexconec splice protector sleeve is the industry standard for durable and lasting protection of single fiber splices in field installations.

0.0 EGP
1U/2U 19” BLANK METAL PLATE - PLxx
NEXCONEC® 1U and 2U 19’’ blanking plate is specifically designed for mounting on the cabinets for the redundant space which will make the whole installation tidy and neat.
0.0 EGP
1U 19″ SNAP-IN BLANKING PLATE PLASTIC - FCM00
Nexconec 19” snap-in Blanking Plate (Panel) provide easy tool-less installation and ensure proper airflow to equipment. Used to cover unused rack space in cabinets or open frame racks for a finished appearance. Can also be used for surface mounting small devices. Blanking Plates are flat with mounting slots spaced at 19”(inches).
This rack filler plastic plate is 1U in height. It clips directly into square hole rail cutouts and does not require cage nuts or screws to install. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

0.0 EGP
1U CABLE MANAGER 4 HOOKS METAL 75MM - FCM01
The NEXCONEC® 1U Cable Manager Bar with 4 metal hooks is specifically crafted to fit 19” rack spaces. It efficiently organizes cables ranging from small to large bundles, ensuring a tidy arrangement and allows easy cable management for both left and right cable routings. This innovative cable management bar serves as an optimal solution for supporting patch cords in a 19" rack while also mitigating air flow loss within the racking system.
0.0 EGP
1U CABLE MANAGER 4 HOOKS METAL 75MM - FCM01

Nexconec 1U Cable Bar with 5 plastic hooks is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It’s offers quick and easy installation. The bar has 5 plastic hooks on the front to manage cables for left or right cable routings.

0.0 EGP
1U CABLE MANAGER WITH BRUSH STRIP 5 HOOKS PLASTIC 70MM - FCM03
Nexconec 1U Cable Bar with brush and 5 plastic hooks is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It’s offers quick and easy installation. The bar has 4 slots of brushes and 5 plastic hooks on the front to manage cables for left or right cable routings.
0.0 EGP
1U/2U CABLE MANAGER RAIL - FCM04/05
Nexconec Plastic Cable Bar is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It’s offers quick and easy installation. The bar has 12 slots on the top and bottom to manage cables for top and below with additional slots on the back to manage cables for back entry.
0.0 EGP
1U 19” BRUSH STRIP BAR - FCM06
Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.
0.0 EGP
2U 19” BRUSH STRIP BAR - FCM07
Nexconec horizontal 1U and 2U cable organizer with brush strip promote proper airflow while allowing cables to be passed from the rear of the rack.
0.0 EGP