Nexconec 1U Cable Bar with brush and 5 plastic hooks is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It’s offers quick and easy installation. The bar has 4 slots of brushes and 5 plastic hooks on the front to manage cables for left or right cable routings.

Nexconec 1U Cable Bar with 5 plastic hooks is designed for 19-inch rack space. The cable bar provides a neat and simple means of organizing cables from small to large bundles. It’s offers quick and easy installation. The bar has 5 plastic hooks on the front to manage cables for left or right cable routings.

NEXCONEC® 19” snap-in Blanking Plate (Panel) provide easy tool-less installation and ensure proper airflow to equipment. Used to cover unused rack space in cabinets or open frame racks for a finished appearance. Can also be used for surface mounting small devices. Blanking Plates are flat with mounting slots spaced at 19”(inches). This rack filler plastic plate is 1U in height. It clips directly into square hole rail cutouts and does not require cage nuts or screws to install. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

Nexconec splice protector sleeve is specifically made to accommodate the bare fibers when fusion splicing. The different lengths of splice protectors offer the flexibility to fiber optic network installers to adapt the variant of splice trays, splice holders and in designing optical modules.

The strength member made with 1.0mm in diameter of stainless steel provides the robust holding to the fibers. The Nexconec splice protector sleeve is the industry standard for durable and lasting protection of single fiber splices in field installations.

Nexconec mini overhead brackets are designed to mount in overhead rails. This accessory helps to create extra space within datacenter to install patch panels without a cabinet. Special screws mounting provides quick and easy installation.

Reducer bracket allows rack mount equipment designed for 19" (483 mm) equipment to be properly installed into 21" racks.

Nexconec fiber management guide are designed to route and protect the bending radius of the patch cords. This accessory can be retrofitted to any 1U panel without removing the products already installed underneath.

Nexconec Transition Breakout Box solution is designed for enhanced cable management that helps to organize the incoming cable into separate conduits which will connect to the NGX or LGX splice modules or any other splicing unit. The breakout box is designed to support up to 144Fo.

Nexconec splice tray is designed to splice 12 individual fibers which can be installed in rack mount patch panels, all mount enclosures, terminal box or distribution unit. The splice trays provide security for fusion splicing and can be used with different cable options. The splice tray is supplied with rigid plastic cover to protect the splice and fibers.

Nexconec’s fiber cable management ring manages fiber slack in all different type of rack and wall mount enclosures. Fiber retention tabs maintain minimum bend radius control, while rounded edges eliminate the risk of snagging and stress.

Designed to accommodate different cable diameters of up to 3mm, this Fiber Slack Management Spool can be split into half to accommodate different fiber routing as well be stacked together thru a simple snap-in.

Nexconec’s fibre splice tray is designed to safely splice 12 or 24 individual fibers which can be installed in rack mount patch panels, wall mount enclosures, terminal box or distribution unit. The stackable fiber cassettes provide security for fusion splicing and can be used with different cable options. The tray incorporates clamps to secure loose tubes and pigtails on entry and exit.

The NEXCONEC® 1U Retrofit Front Manager is a comprehensive accessory add-on solution meticulously designed for efficient cable management. This universal 19” front manager seamlessly fits with all 1U fixed frames or sliding panels and mounts in the same unit space without consuming extra rack space. Intelligently functioning as an integral component in streamlining and organizing cables.

Nexconec 1U fiber cable storage sliding panel, mounted on 19” network racks. This slide-out tray fiber cable storage patch panel could make your fiber cable management neat and professional in the telecommunication room, data centers to storage excess fibers and cables. Easy front access with inner cable management spools which provides protection and coiling of the excess lengths of the patch cords.

NEXCONEC Dome closure is the best designed and innovative solution for fiber cabling installation. It adopts fully IP68 mechanical sealing structure for good sealing performance of fiber cable over 48 fibers. It can be installed PLC Splitter up to 2x 2:32 with 36 SC Simplex Adapters ports. Multi-application and installations with Aerial, Pole Mounting and Wall Mounting.

NEXCONEC high fiber count splice closure is a dome type with large capacity, with vulcanized rubber as sealing component, helical and extrusion mechanical sealing. It is suitable for different methods of branch cable connection including the branch of uncut cable. Multi-application purpose with for aerial, pole-mounted, wall-mounted and buried application. The closure has very goods sealing performance, convenient to operate and wide range of applications.

NEXCONEC Compact Dome Enclosure is the best designed and innovative solution for fiber cabling installation. It only requires its silicone rubber sealing gasket to ensure the good sealing performance of fiber cable, up to 96fibers of fiber count. The different sizes of cable entrances provide the great flexibility for cables installation.

NEXCONEC Compact Dome closure with a hinged door for easy access and maintenance is an innovate solution to manage up to 60 fibers. The enclosure is ruggedized for harsh environment with IP68 rating. Multiple installation application for FTTH with wall mount and aerial. The different sizes of cable entrances provide the great flexibility for cables installation.

NEXCONEC Dome closure is the best designed and innovative solution for fiber cabling installation. It adopts fully mechanical sealing structure for good sealing performance of fiber cable over 240fibers. The different sizes of cable entrances provide the great flexibility for cables installation.

OC-DO03B/C is used as a termination point for the feeder cable to connect with drop cable in FTTH network system. It is designed to seal without screws. The compact size and flip-over cover bring easy operation as well as multi-purposes applications. It could be installed in aerial, wall, pole and pipe line mounted mode.

OC-DO03A is designed to seal without screws. The compact size and flip-over cover bring easy operation as well as complete function. The splice trays are jointed with a hinge at one side, which makes the operation in each tray easier. It is designed to prevent from operation damage.