NEXCONEC® LC High Density switchable polarity connector is a totally unique design which can increase panel density to its highest while keeping great accessibility. The flexible push and pull tab allows the connector to engage and disengage easily. The connector has an easy mechanism to switch polarity during installation thereby being cost effective at critical times. The unique design uses uniboot to accommodate 2mm or 3mm jacketed cables to reduce cable density and making cable management easier in today’s highly dense applications.

NEXCONEC® LC High Density switchable polarity connector is a totally unique design which can increase panel density to its highest while keeping great accessibility. The flexible push and pull tab allows the connector to engage and disengage easily. The connector has an easy mechanism to switch polarity during installation thereby being cost effective at critical times. The unique design uses uniboot to accommodate 2mm or 3mm jacketed cables to reduce cable density and making cable management easier in today’s highly dense applications.

The NEXCONEC® Quick-Release Push Pull Reversible Uniboot LC are designed to incorporate a reinforced boot for a quick push-pull insertion and removal of the connector without tools or tabs requirement. This innovative design helps conserve precious space in high-density panels and the connector has an easy mechanism to switch polarity within boot during installation. The distinctive design employs a uniboot to house 2.0mm jacketed cables. This feature not only decreases cable density but also simplifies cable management in the context of contemporary high-density applications.

Nexconec SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 10m).

Nexconec SFP28 Direct Attach Cables are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m).

Nexconec 40G QSFP+ to 4x10G SFP+ passive, copper splitter cable assemblies are compliant with SFF-8431/8432/8472 and SFF-8436 specifications and provide connectivity between devices using QSFP+ port on one end and four SFP+ ports on the other end. The unique quality passive copper cable solutions provide power-efficient replacement for active power connectivity such as fiber optic cables. Rigorous cable production testing ensures the best out-of-the-box installation experience, performance and durability.

Nexconec QSFP+ Direct Attach Cables are compliant with the SFF-8436 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m).

Nexconec QSFP28 Direct Attach Cables are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 5m).

Hot-pluggable SFP+ cable ends / Supports 10.3125Gbps bit rate, distance up to 100m on OM4/OM5 fiber.

Compliant to the 40GBASE-SR4 and XLPPI/Specification per IEEE 802.3ba-2010 and supporting/40G-IB-QDR / 20G-IB-DDR / 10G-IB-SDR applications.

Four-channel full-duplex active optical cable / Reliable VCSEL technology using multimode fiber.

Four-channel full-duplex active optical cable / Reliable VCSEL technology using multimode fiber.

Nexconec QSFP28 ER4 Lite Transceivers are designed for 100G Ethernet 100GBASE-ER4, 4WDM-40 and OTN OTU4 links over duplex single mode fibers, support transmission distance up to 40km without FEC and 40km with FEC using LWDM wavelengths (1295.56nm, 1300.05nm, 1304.58nm, 1309.14nm).

Nexconec QSFP28 LR4 Transceivers are designed for 100G Ethernet 100GBASE-LR4 links over duplex single mode fibers, support transmission distance up to 20km using LWDM wavelengths (1296nm, 1300nm, 1305nm and 1309nm).

Nexconec QSFP28 LR1 BiDi Transceivers are designed for 100G Ethernet 100GBASE-LR1 links over duplex single mode fibers, support transmission distance up to 30km using wavelengths (1270nm, 1330nm, 1304nm and 1309nm).

Nexconec 100G QSFP28 CWDM4 Transceivers are designed for 100G Ethernet CWDM4 links over duplex single mode fibers, support transmission distance up to 10km with FEC using CWDM wavelengths (1271nm, 1291nm, 1311nm, 1331nm).

Nexconec 100G QSFP28 PSM4 Transceivers (NX-QP-3G100-02) are designed for 100G Ethernet PSM4 links over multiple single mode fibers, support transmission distance up to 2km using 1310nm wavelengths.

Nexconec 100G QSFP28 SR4 Transceivers (NX-QP-8G100-01) are designed for 100G Ethernet 100GBASE-SR4 links over multiple multimode fibers, support transmission distance up to 100m using 850nm wavelengths.

Nexconec® 40G QSFP+ PSM4 optical transceiver modules include 40GE QSFP+ PSM4 2km, 40GE QSFP+ PSM4 10km. They are designed for 10G/40G Ethernet, InfiniBand SDR/DDR/QDR, reach up to 2km/10km over SMF.

Nexconec® 40G QSFP+ ZR4 Transceiver is designed to operate over SM fiber system using four 10Gbps 1300 LWDM band which is based on two LC connectors for optical connectivity and supports 40Gbps data rate links of up to 80km.