Rotary Swing out 3U patch panels are designed for the FTTH networks, specifically for the street cabinet where full front access is required. This 3U panel accommodates 144 SC/APC adapters and is loaded with bend insensitive pigtails G657A2 and the complete splicing trays and rooting.

Nexconec 1U rotary splitter panel is widely used in optical communication networks, completing such functions as splicing, splitting and 64-fiber distribution. It can be installed optical splitter (maximum splitting ratio: one 1X64 optical splitter) to implement optical splitting and capacity expansion. After the product left-handed rotated, fixing optical splitter and back panel of splicing tray left-handed rotated. Backbone inlets adopt embedded way, convenience for operation and maintenance.

Nexconec 3U rotary splitter panel is widely used in optical communication networks, completing such functions as splicing, splitting and 128-fiber distribution. It can be installed optical splitter (maximum splitting ratio: two 1X64 optical splitter) to implement optical splitting and capacity expansion. After the product left handed rotated, fixing optical splitter and back panel of splicing tray left handed rotated. Backbone inlet adopt embedded way, convenience for operation and maintenance..

NEXCONEC® passive 4 channels up to 48 channels DWDM MUX or and DEMUX slim panel, allows you to multiplex 4 to 48 separate channels into one pair of fiber, de-multiplex the one pair fiber into 4 to 48 channels, which is mainly used in the long-haul transmission where wavelengths are integrated together over the C-band. This slim DWDM patch panel supports up to 48 channels inn 100GHz.
Its protocol and rate transparent supporting different applications such as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel across the same fiber link. With slim patch panel design, it can support a wide range of architectures from simple point-to-point to ring configurations.

Nexconec introduces a new family of high performance fiber optic PLC Splitter loaded into 19-in Rack Mount Panels for today’s high-port count applications that demand the best performance and the highest reliability under the most adverse of environments. The rackable Splitter Panels are available in 8-, 16-, and 32-channel or two (1x32) channel configurations with SC or LC connector.

Nexconec introduces a new family of plc splitter cassette lgx loaded into our family of Modules: LGX, HD or NGX. Module provides a plug-and-play solution for higher scalability for network upgrades. The compact plc splitter module SC/APC features low insertion loss, low polarization dependent loss, and high port-to-port uniformity. The PLC Splitter Modules are available in 4-, 8-, 16-channel configurations with SC or LC ports.

Nexconec passive 8 channels HD CWDM MUX or and DEMUX cassette, allows you to multiplex/de-multiplex eight separate channels into one pair of fiber. Its protocol and rate transparent supporting different applications such as 1G/10G/25G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel across the same fiber link.
With modular design, the Mux can be combined with CWDM/DWDM modules, OADMs and MTP cassettes in 1U FHD patch panel. Also it can support a wide range of architectures from simple point-to-point to ring configurations.

Nexconec 1U rotary splitter panel is widely used in optical communication networks, completing such functions as splicing, splitting and 64-fiber distribution. It can be installed optical splitter (maximum splitting ratio: one 1X64 optical splitter) to implement optical splitting and capacity expansion. After the product left-handed rotated, fixing optical splitter and back panel of splicing tray left-handed rotated. Backbone inlets adopt embedded way, convenience for operation and maintenance.

Nexconec 3U rotary splitter panel is widely used in optical communication networks, completing such functions as splicing, splitting and 128-fiber distribution. It can be installed optical splitter (maximum splitting ratio: two 1X64 optical splitter) to implement optical splitting and capacity expansion. After the product left handed rotated, fixing optical splitter and back panel of splicing tray left handed rotated. Backbone inlet adopt embedded way, convenience for operation and maintenance.

NEXCONEC Planar Lightwave Circuit (PLC) splitters are specially designed for Fiber Optic Distribution Network applications. PLC splitters are available in the form of compact component type, ABS box type.
NEXCONEC PLC splitters come with a variety of connector options to meet customer requirements. A move towards PON’s within the FTTX arena calls for a device offering low insertions loss, linear uniformity and high return loss, our splitters provide excellent specifications as well as complying to and exceeding Telcordia GR-1221-CORE and GR-1209-CORE standards.

Nexconec compact & low-profile modular wall box accepts 1 LGX Modules or LGX pass-thru adapter plates for a total of 24FO with LC configuration. Modular small factor box for multi-application with MPO System, Pre-terminated cables or conventional splicing.
Box is supplied unloaded and the modules and plates are supplied separately, as well as splicing accessories.

Nexconec modular wall box accepts 2 LGX Modules or LGX pass-thru adapter plates for a total of 48FO with LC configuration. Modular small factor box for multi-application with MPO System, Pre-terminated cables or conventional splicing.
Box is supplied unloaded and the modules and plates are supplied separately, as well as splicing accessories.

Nexconec modular wall box accepts 4 LGX Modules or LGX pass-thru adapter plates for a total of 96FO with LC configuration. Modular small factor box for multi-application with MPO System, Pre-terminated cables or conventional splicing.
Box is supplied unloaded and the modules and plates are supplied separately, as well as splicing accessories.

NEXCONEC Lockable Double Door distribution box is supplied unloaded as standard and offers the ability to terminate up to 48 fibers housed in a strong metal enclosure for indoor application.
An internal splicing section offers a neat and tidy solution for housing up to the adapters and splicing area. A locking for the both sections: Splicing and Patching adds extra security when positioned in un-secure areas.

Nexconec compact & low-profile modular DIN RAIL MODULAR BOX is designed for use in a wide range of industrial applications. This compact fibre din box accepts up to 24 fibers in LC configuration or 6 copper keystones jacks. Modular small DIN rail-mounted enclosure box for multi-application with MPO System, Pre-terminated cables or conventional splicing.

Nexconec compact & low-profile modular LGX DIN RAIL MODULAR BOX is designed for use in a wide range of industrial applications. Accepts 1 LGX Adapter Plate. Modular small factor box for multi-application for Pre-terminated cables or conventional splicing.

NEXCONEC® WP06U1 Lockable IP65 distribution box offers the ability to terminate up to 24 fibers housed in a strong robust ABS enclosure for indoor and outdoor applications.
With the ability to use both SC Duplex and LC Quad adapter types offering a flexible solution to the end user, enabling them to incorporate a multi-functional enclosure which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.
Each enclosure has integrated strength member tie positions and bend radius protection with the addition of a removable front door allowing for quick and easy installation.

NEXCONEC® WP08U1 IP65 distribution box offers the ability to terminate 8 fibers housed in a strong robust ABS enclosure for indoor and outdoor applications.
With the ability to use both SC Simplex and LC Duplex adapter types offering a flexible solution to the end user, enabling them to incorporate a multi-functional enclosure which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.

NEXCONEC® WP09U1 lockable distribution box offers the ability to terminate 8 fibers housed in a strong robust PC+ABS enclosure for indoor and outdoor applications.
With the ability to use both SC Simplex and LC Duplex adapter types offering a flexible solution to the end user, enabling them to incorporate a multi-functional enclosure which allows easy access during installation or re-work with no disturbance of the existing cable or fibers.
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management
for the FTTx network building.

NEXCONEC® Lockable IP65 & UV Resistant distribution box is supplied unloaded as standard and offers the ability to terminate 12 fibers housed in a strong robust ABS enclosure for indoor and outdoor applications.
An internal detachable tray provides a neat and tidy solution for housing 12 SC simplex connections and splices. The box has 12 patch cord exit points and up to 2 cable entry points which maintain the IP65 rating.