Fiber Optic Cabling

Pre-polished Unicam SC/APC standard performance single-mode 9/125 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC standard performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST standard high multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST high performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST high performance single-mode 9/125 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC high performance multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC High performance multimode 50/125 OM2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC high performance single-mode 9/125 OS2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam LC high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam LC high performance multimode 50/125 OM2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam LC high performance single-mode 9/125 OS2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Single-mode pigtail 9/125 type G.657.A2, terminated with SC/APC connectors. Suitable to be used in multifiber building systems for the fusion splice termination of the optical cables inside the Building Entry Point, the Optical Telecommunication Wall Outlet and the Fiber Distribution Box.

ST pigtails for the termination of single-mode optical fibers by electric arc fusion splicing. Pigtails in 12-unit sets with colour coding according to IEC 60304 standard, easy-strip version and with different types of connectors are available upon request.

SC/APC pigtails for the termination of single-mode and multimode optical fibers by electric arc fusion splicing. Available also set of 12 coloured easy strip pigtails according to the IEC60304 standard, with tailored connectors and lengths

SC pigtails for the termination of single-mode optical fibers by electric arc fusion splicing. Pigtails in 12-unit sets with colour coding according to IEC 60304 standard, easy-strip version and with different types of connectors are available upon request.

ST pigtails for the termination of multimode optical fibers by electric arc fusion splicing. Pigtails in 12-unit sets with colour coding according to IEC 60304 standard, easy-strip version and with different types of connectors are available upon request.

SC pigtails for the termination of multimode optical fibers by electric arc fusion splicing. Pigtails in 12-unit sets with colour coding according to IEC 60304 standard, easy-strip version and with different types of connectors are available upon request.

ST pigtails for the termination of multimode optical fibers by electric arc fusion splicing. Pigtails in 12-unit sets with colour coding according to IEC 60304 standard, easy-strip version and with different types of connectors are available upon request.