Fiber Optic

Single-mode 9/125 G.652.D bifiber patch cords, terminated with LC-LC connectors at both ends. Ideal for the connection between active equipments and patch panels and boxes. Available from 1mt to 5mt standard length. Patch cords with other types of connectors and in customized lengths can be supplied upon request

Single-mode 9/125 G.652.D bifiber patch cords, terminated with LC-LC connectors at both ends. Ideal for the connection between active equipments and patch panels and boxes. Available from 1mt to 5mt standard length. Patch cords with other types of connectors and in customized lengths can be supplied upon request

Single-mode 9/125 G.652.D bifiber patch cords, terminated with LC-LC connectors at both ends. Ideal for the connection between active equipments and patch panels and boxes. Available from 1mt to 5mt standard length. Patch cords with other types of connectors and in customized lengths can be supplied upon request

Epoxy ST type glue-on connector for the termination of single-mode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050

ST type glue-on connector for the termination of multimode optical fibers with cold termination technique. It can be used for the termination of Tight and Loose optical fibers. With the cold termination system the connector is fixed to the fiber through the use of the glue kit code 2007010. The one-component glue reacts in a very short time by gluing the fiber to the ferrule and to the connector body. The subsequent cutting and lapping phase makes the surface of the head suitable for contact with other connectors of the same type. To use this type of connector, the termination kit with code 2040050 is required in addition to the glue kit.

Epoxy SC type glue-on connector for the termination of multimode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050

Epoxy LC type glue-on connector for the termination of multimode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050

Pre-polished Unicam ST standard performance multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST standard performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC/APC standard performance single-mode 9/125 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC standard performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST standard high multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST high performance multimode 50/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam ST high performance single-mode 9/125 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC high performance multimode 62, 5/125 OM1 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC High performance multimode 50/125 OM2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam SC high performance single-mode 9/125 OS2 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.

Pre-polished Unicam LC high performance multimode 50/125 OM3/OM4 connector for an easy and quick termination of optical fibers without the use of resin or adhesive. The fiber to be used for the termination is spliced with the fiber already pre-installed and pre-polished into the connector by using a special gel which doesn’t need any heating or electric power, thus granting a very high quality and minimizing the problems occurring within the harsh working conditions in installation sites. A special closure system, equipped with a light emitter, verifies the connection continuity and the success of the splicing. The Kit code 2040150 is to be used for the connectors’ termination.