COPPER

Adapter for installation of CCS RJ45 data sockets on ABB Mylos type civil series frames.

Adapter for installation of CCS RJ45 data sockets on ABB Elos type civil series frames.

Adapter for installation of CCS RJ45 data sockets on ABB Chiara type civil series frames.

A network isolator is a device that can ensure electrical separation in LAN networks: it disconnects all electrically conductive connections between network peripherals and the connected device by providing protection against voltages up to 4 kV and higher. At the same time, it makes it possible to transmit data signals with extremely low losses in accordance with Cat. 6A/Class EA performance. This type of isolators are used especially in the medical sector to reduce the risk of potential electrical injury to operators or patients and limit the extent of lightning damage. An adapter for DIN rail installation is provided as accessory.

Crimping tool for RJ45 8-position plugs and cable of Category 5E and 6.

CCS shielded 8-pole plug with pre-insert to create patch cords with cables with flexible conductors. Characteristics meet and exceed CAT 6 – Class E requirements according to ISO/IEC 11801 and ANSI/TIA-568.2-D.

CCS unshielded 8-pole plug with pre-insert to create patch cords with cables with flexible conductors. Characteristics meet and exceed CAT 6 – Class E requirements according to ISO/IEC 11801 and ANSI/TIA-568.2-D.

CCS Cat.5E shielded 8-pole plug to create patch cords with cables with flexible conductors. Characteristics meet and exceed CAT 5E – Class D requirements according to ISO/IEC 11801 and ANSI/TIA 568.2-D.

CCS Cat.5E unshielded 8-pole plug to create patch cords with cables with flexible conductors. Characteristics meet and exceed CAT 5E – Class D requirements according to ISO/IEC 11801 and ANSI/TIA 568.2-D.

red boot to be used with Cat.5E and Cat.6 plugs for cables with flexible conductors. Useful to protect the plugs termination against the flexion and for the identification of the patch cord type. Available in different colours for a fast and easy identification of the cables.

grey boot to be used with Cat.5E and Cat.6 plugs for cables with flexible conductors. Useful to protect the plugs termination against the flexion and for the identification of the patch cord type. Available in different colours for a fast and easy identification of the cables.

Yellow boot to be used with Cat.5E and Cat.6 plugs for cables with flexible conductors. Useful to protect the plugs termination against the flexion and for the identification of the patch cord type. Available in different colours for a fast and easy identification of the cables.

blue boot to be used with Cat.5E and Cat.6 plugs for cables with flexible conductors. Useful to protect the plugs termination against the flexion and for the identification of the patch cord type. Available in different colours for a fast and easy identification of the cables.

CCS 19” patch panel suitable for the installation up to no. 24 Easy Crimp couplers Cat 6A for copper cables (P/N 2012027). Ideal to extend existing copper links.

CCS in-line coupler Category 6A shielded, ideal to extend existing copper links. Toolless termination system for a quick and easy termination. It complies with Cat. 6A Class EA performances, standard ISO/IEC 11801, EN 50173 and ANSI/TIA 568.2-D.

CCS Easy Crimp Cat.6A shielded plug used to connect cables with solid and flexible conductors. With the tool less Easy Crimp system, the connection is always fast and performing. Ideal for the realization of the modular plug terminated link (MPTL), “transition point” or patch cords out of the standard lengths. Characteristics meet and exceed Cat.6A – Class EA requirements according to ISO/IEC 11801 and ANSI/TIA-568.2-D.Suitable for PoE/PoE+/PoE++ applications.

CCS Easy Crimp Cat.6 shielded plug used to connect cables with solid and flexible conductors. With the tool less Easy Crimp system, the connection is always fast and performing. Ideal for the realization of the modular plug terminated link (MPTL), “transition point” or patch cords out of the standard lengths. Characteristics meet and exceed CAT 6 – Class E requirements according to ISO/IEC 11801 and ANSI/TIA-568.2-D. Suitable for PoE/PoE+/PoE++ applications.

CCS Easy Crimp Cat.6 unshielded plug used to connect cables with solid and flexible conductors. With the tool less Easy Crimp system, the connection is always fast and performing. Ideal for the realization of the modular plug terminated link (MPTL), “transition point” or patch cords out of the standard lengths. Characteristics meet and exceed CAT 6 – Class E requirements according to ISO/IEC 11801 and ANSI/TIA-568.2-D. Suitable for PoE/PoE+/PoE++ applications.

CCS Cat.5E unshielded plug used to connect cables with solid conductors. With the tool less Easy Crimp system, the connection is always fast and performing. Ideal for the realization of “transition point” or patch cords out of standard lengths. Characteristics meet and exceed Cat.5E – Class D requirements according to ISO/IEC 11801 and ANSI/TIA 568.2-D.

CCS Easy Crimp Compact Cat. 6A shielded RJ45 field plug used to terminate cables with solid or stranded conductors. Toolless plugs, no tool is needed for a quick and easy termination. Ideal for the realization of MPTL connections (Modular Plug Terminated Link) or patch cords of non-standard length. It is compliant to PoE/PoE+/PoE++ applications.