Nexconec

The NEXCONEC® Dead Zone Eliminator establishes a connection with the OTDR and the link that is being tested, with the aim of evaluating the link's attenuation and the reflectance of the connection at the near end. This dead zone is provided in a robust, compact plastic casing, ideal for use in a rugged environment.

NEXCONEC handheld power meter is a full-function optical power meter, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with NXOLS201A optical light source, it offers a quick and accurate testing solution on both SM and MM fibers.
Compared with usual power meters, the NXOPM101A has more great functions/features of automatic wavelength identification and switching, as well as intelligent backlight control. Also this type has features of good appearance, good touch feeling and considerate humanization design.

NEXCONEC handheld light source is designed to match NXOPM101A, it not only can provide stable out power, but also it combined usage with NXOPM101A, they can realize automatic wavelength identification and automatic frequency identification. Also the NXOLS201A has features of good appearance, good touch feeling and considerate humanization design.

NEXCONEC Portable Inspection Microscope is the upgraded version, which provides network installer with high performance fiber inspection solutions. The whole set includes a digital probe, the monitor with the capability to inspect/record/file the data of fiber end face from assorted connectors.
This portable inspector can check the end face of pigtail and patch cord, and also capable of inspecting the connector end face through adapter which is already mounted on the patch panel, wall box without unplug the pigtail or patch cord from the other end.

NEXCONEC Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without interrupting the current service. The fiber identifier recognizes modulation like, 270Hz, 1KHz and 2KHz with continuous audible tone. There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0. This OFI is powered by 2 pcs very normal AAA batteries.

The Miller CFS-3 Fiber Optic Stripper, with 3-hole designed to precisely remove 1.6mm to 3mm fiber jacket, 600 to 900-micron buffer and 250-micron acrylate without scratching or nicking the fiber. Factory-set blade notches require no adjustment. A stripping guide on the handle is convenient for fast operation.

Nexconec high performance optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.

Nexconec connectors are manufactured using state-of-the-art ferrules and components. Available in SC, LC, FC and ST in both PC and APC in singlemode and multimode PC. The connector consists of a polymer body and a ceramic ferrule/spring/crimp barrel assembly in addition to a crimp-over sleeve and rubber boot. These connectors are suitable for 900μm, 2mm and 3mm cables.
The connector is precision-made and manufactured under demanding specifications. The combination of a ceramic ferrule with polymer housing provides consistent, long-term mechanical and optical performance.

NEXCONEC® Field Installable Connectors (FIC) are factory terminated and polished to make fiber terminations fast, easy and reliable. The fiber optic connectors offer terminations in less than 2 minutes without any difficulty and requires no epoxy, polishing or crimping. NEXCONEC® FIC greatly reduces the installation and setup time. It has a window feature to allow testing with a visual fault locator.

NEXCONEC high-performance attenuators are designed to give accurate attenuation over a wide range of wavelengths. The male-female plug type configuration can be used directly on the end of a patch cord, which in turn can insert directly into an adaptor. Available in FC, SC and LC connector styles with UPC or APC finish, attenuators providing ultra-low return loss and are available from 1dB to 30dB.

NEXCONEC Fiber Optic Adaptors are a range of high-quality adaptors which have high precision alignment sleeves for high reliability and better repeatability. The housing is available in different colours (for SC and LC only) and with options for flange or flangeless body and metal clips.

NEXCONEC SC Simplex Shutter Adaptor is designed for applications where laser safety and dust protection are important factors. It is suitable for FTTH and other telecom applications. It has a high precision zirconia alignment sleeve designed for high reliability and excellent repeatability in single mode networks.

NEXCONEC® IP68 ODVA optical fiber cable assemblies provide an environmental seal and mechanical protection for outdoor application. ODVA connectors are available in SC Simplex, LC Duplex or MTP/MPO. They provide quick installation solutions and have good performance on mating with ODVA receptacles.
The assemblies guarantee an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.

NEXCONEC® IP67 rated ODVA Fiber Optic Cable Glands featuring SC, LC or MPO adapter types, offer exceptional performance and durability and designed to withstand extreme temperatures, moisture, and other environmental challenges.
Whether in an indoor or outdoor application, these cable glands are ideal for FTTA and harsh environment use and enable you to achieve optimal performance and reliability in your fiber optic network. Guarantee an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.

Nexconec compact ODVA junction box allows users to transition from an ODVA MTP/MPO Base-12 to a standard 6 LC Duplex ports. The ODVA entry guarantees an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.

Nexconec compact ODVA Din Rail MPO-MPO junction box allows users to transition from an ODVA Base-12 or Base-24 MTP/MPO to another ODVA MTP/MPO ports to extend the link. ODVA box gives IP20 protection, where the ODVA connector gives IP68 protection. The ODVA entry guarantees an easy, one-step connection system with the combined push-pull insertion and bayonet-style mechanical latch.

The ODVA Waterproof box is a fast connect closure that is sealed mechanically. It is single ended design and is generally used on the cable distribution section. The closure provides a quick and reliable cable connection function in FTTH scenarios. It supports 6 pcs fast connect drop cables.

NEXCONEC® Rack Mount Media Converter Chassis provides higher density for large installations of media converters in standard 2U. The innovative design allows either standalone or card type media converters to be inserted in slots. The managed type of media converter chassis provides excellent remote operation through graphic user interface without any access to the media converter or chassis itself. The High port density allows a variety of media converter solutions to be housed in a minimum amount of rack spaces for enterprise-level businesses and carriers. Redundant, fan-cooled load-sharing power supplies can be hot-swapped to ensure system uptime.