SPLICING MODULES & PANELS

NEXCONEC NGX SPLICING cassettes are designed for splicing up to 24F in a cassette. The NGX fiber splice cassettes are designed to easily plug into NEXCONEC NGX 1U 6 slot panel and each chassis can populate up to 144F with LC and 72F with SC. The high density splice cassettes are preloaded with adaptors and pigtails supplied with splicing accessories.

NEXCONEC® NGX MTP/MPO-Splicing cassettes are designed for splicing up to 24F in a cassette with 2xMPO Base-12 Single mode/Multimode MTP/MPO connectors. The NGX cassettes are designed to easy plug into Nexconec NGX 1U 6-slot panel and each chassis can populate up to 144F with LC and 72F with SC. The cassettes are preloaded with adaptors and pigtails supplied with splicing accessories.

NEXCONEC® HD splicing modules allow users to fusion splice micro cables, loose-tube cables or ribbon cables to factory assembled pigtails. For up to 24 splices in LC configuration or 12 in SC. The splice clip is interchangeable allowing different splice protectors to be integrated such as heat-shrink, ribbon or sandwich (ANT) type.

Nexconec® HD MTP/MPO-Splicing cassettes allow users to fusion splice micro cables, loose-tube cables or ribbon cables to factory assembled pigtails. This metallic body module is designed to splices up to 24F with 2xMPO Base-12 Single mode/Multimode MTP/MPO connectors. The splice clip is interchangeable allowing different splice protectors to be integrated such as heat-shrink, ribbon, or sandwich (ANT) type.
The HD MTP/MPO-Splicing cassette is easy to plug into all Nexconec® HD range panels. These MPO splice cassettes are preloaded with adaptors and pigtails, supplied with splicing accessories.

NEXCONEC® LGX splicing modules allow users to fusion splice micro cables, loose-tube cables or ribbon cables to factory assembled pigtails. For up to 24 splices in LC configuration or 12 in SC. The splice clip is interchangeable allowing different splice protectors to be integrated such as heat-shrink, ribbon or sandwich (ANT) type.

Nexconec Interchangeable Front adapter plate and sliding patch panel permit stock reduction with these 2 parts constructions. Increased flexibility with 1 chassis in stock for all loading configuration and fiber counts within 1U. Attach the suitable front panel as per requirements.
The panel can also be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 12 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 24 adapters SC Duplex or LC Quad within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 24 adapters SC Simplex or LC Duplex within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 24 adapters FC or ST within 1U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 48 adapters SC Simplex or LC Duplex within 2U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 48 adapters SC Duplex or LC Quad within 2U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

Nexconec sliding patch panel accepts 48 adapters FC or ST within 2U space. The panel can be pre-loaded completely with the required adapters or pre-loaded with pigtails and splice accessories. The tray is locked by 2 plastic latches and lowers to a 45deg angle when fully extended. Installation and labelling are simple and easy.

NEXCONEC® 1U Pivot Patch Panel is an innovative, high density pivot panel designed to accept 24 SC Simplex/LC Duplex adapters in each of two ½ RU trays within 1U space (Up to 96FO in LC). Each tray effectively manages the incoming fibers, pigtails and splices. Each tray offers individual pivoting up to 120° to ensure easy access during installation or rework without any interference with the existing cable or fibers.
The remarkable panel design includes a detachable see-through lid and a transparent hinged drop-down door to ensure easy access, simplifies labelling and maintenance routines. Ventilation tracts within the panel enable constant airflow, facilitating optimal cooling for the active equipment with utmost efficiency.
The pivot panel can be pre-loaded completely with the required adapters and pigtails.

NEXCONEC® 1.5U Pivot Patch Panel is an innovative, high density pivot panel designed to accept 24 SC Simplex/LC Duplex adapters in each of ½ RU trays within 1.5U space (Up to 144FO in LC). Each tray effectively manages the incoming fibers, pigtails and splices. Each tray offers individual pivoting up to 120° to ensure easy access during installation or rework without any interference with the existing cable or fibers.
The remarkable panel design includes a detachable see-through lid and a transparent hinged drop-down door to ensure easy access, simplifies labelling and maintenance routines. Ventilation tracts within the panel enable constant airflow, facilitating optimal cooling for the active equipment with utmost efficiency.
The pivot panel can be pre-loaded completely with the required adapters and pigtails.

NEXCONEC® 3U Pivot Patch Panel is a cutting-edge, super high density pivot panel designed to accept 24 SC Simplex/LC Duplex adapters in each of six ½ RU trays in the 3U space (Up to 288FO in LC). This innovative panel effectively organizes incoming fibers, pigtails, and splices. Each tray is designed with the convenience of 120° individual pivoting, ensuring hassle-free access during installation or rework, without any disruption to existing cables or fibers.
The remarkable design of the panel incorporates a detachable see-through lid and transparent hinged drop-down doors in each ½ RU trays for effortless accessibility, streamlining labeling and maintenance procedures. Incorporated ventilation pathways within the panel guarantee uninterrupted airflow, ensuring superior cooling for the active equipment with unparalleled efficiency.
The pivot panel can be pre-loaded completely with the required adapters and pigtails.

Rotary Swing out patch panels are designed for the FTTH networks, specifically for the street cabinet where full front access is required. This 1U panel accommodates 48 SC/APC adapters and is loaded with bend insensitive pigtails G657A2 and the complete splicing trays and rooting.

Rotary Swing out 3U patch panels are designed for the FTTH networks, specifically for the street cabinet where full front access is required. This 3U panel accommodates 144 SC/APC adapters and is loaded with bend insensitive pigtails G657A2 and the complete splicing trays and rooting.

Nexconec 1U rotary splitter panel is widely used in optical communication networks, completing such functions as splicing, splitting and 64-fiber distribution. It can be installed optical splitter (maximum splitting ratio: one 1X64 optical splitter) to implement optical splitting and capacity expansion. After the product left-handed rotated, fixing optical splitter and back panel of splicing tray left-handed rotated. Backbone inlets adopt embedded way, convenience for operation and maintenance.

Nexconec 3U rotary splitter panel is widely used in optical communication networks, completing such functions as splicing, splitting and 128-fiber distribution. It can be installed optical splitter (maximum splitting ratio: two 1X64 optical splitter) to implement optical splitting and capacity expansion. After the product left handed rotated, fixing optical splitter and back panel of splicing tray left handed rotated. Backbone inlet adopt embedded way, convenience for operation and maintenance..