Glue-On Connectors

Epoxy ST type glue-on connector for the termination of single-mode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050

ST type glue-on connector for the termination of multimode optical fibers with cold termination technique. It can be used for the termination of Tight and Loose optical fibers. With the cold termination system the connector is fixed to the fiber through the use of the glue kit code 2007010. The one-component glue reacts in a very short time by gluing the fiber to the ferrule and to the connector body. The subsequent cutting and lapping phase makes the surface of the head suitable for contact with other connectors of the same type. To use this type of connector, the termination kit with code 2040050 is required in addition to the glue kit.

Epoxy SC type glue-on connector for the termination of multimode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050

Epoxy LC type glue-on connector for the termination of multimode optical fibers of Tight and Loose cables. This technology requires the use of epoxy glue Code 2007010 and the polishing of the inserted optical fiber. This type of adhesive glues the fiber into the ferrule of the connector very quickly, the fiber-end cut and polishing make the connector head surface fit for the contact with other connectors of the same type. To use this type of connectors it is necessary to buy the termination kit Code 2040050