110 Cabling System

2-pair telephone patch cord

IDC voice 50-port patch panel preloaded with 50 RJ45 CAT.3 IDC110 unshielded 6-conductor jacks.

Spare blade for impact tool code 2004018, dual side featured: 110 and 110 insertion with blade.

Termination fixture for the 90°/180° crimping of RJ45 jacks type 110. It holds the connector thus making the termination easier and minimizing the risk of accidents.

Impact tool suitable for the cable connection to jacks or IDC 110 patch panels

CAT.5E CCS shielded RJ45 jack with IDC 110 termination system for transmission channels of Class D. Certified by independent laboratories according to CAT.5E requirements on the single component, it supports Gigabit Ethernet (IEEE 802.3ab) and is suitable for PoE applications.

CAT.5E CCS 24 -port patch panel, preloaded with 24 shielded RJ45 jacks with IDC 110 termination system for transmission channels of Class D. Characteristics meet and exceed CAT.5E – Class D requirements up to 100MHz according to the ISO/IEC 11801 and ANSI/TIA 568.2-D standards. They support Gigabit Ethernet (IEEE 802.3ab) and are suitable for PoE (IEEE 802.3af) applications.

CAT.5E CCS 24 -port patch panel, preloaded with 24 unshielded RJ45 jacks with IDC 110 termination system for transmission channels of Class D. Characteristics meet and exceed CAT.5E – Class D requirements up to 100MHz according to the ISO/IEC 11801 and ANSI/TIA 568.2-D standards. They support Gigabit Ethernet (IEEE 802.3ab) and are suitable for PoE (IEEE 802.3af) applications.

CAT.5E CCS 16 -port patch panel, preloaded with 16 shielded RJ45 jacks with IDC 110 termination system for transmission channels of Class D. Characteristics meet and exceed CAT.5E – Class D requirements up to 100MHz according to the ISO/IEC 11801 and ANSI/TIA 568.2-D standards. They support Gigabit Ethernet (IEEE 802.3ab) and are suitable for PoE (IEEE 802.3af) applications.

CAT.6 CCS shielded RJ45 jacks with IDC 110/Krone termination system for transmission channels of Class E. The characteristics meet CAT.6 Class E requirements up to 250 MHz according to the ISO/IEC 11801 and ANSI/TIA 568.2-D standards. They support Gigabit Ethernet (IEEE 802.3ab) and are suitable for PoE (IEEE 802.3af) applications.

CAT.6 CCS unshielded RJ45 jacks with IDC 110/Krone termination system for transmission channels of Class E. The characteristics meet CAT.6 Class E requirements up to 250 MHz according to the ISO/IEC 11801 and ANSI/TIA 568.2-D standards. They support Gigabit Ethernet (IEEE 802.3ab) and are suitable for PoE (IEEE 802.3af) applications.

CAT 6 CCS 24-port patch panel, made with 4 frontal 6-port removable modules, preloaded with 24 unshielded RJ45 CCS jacks with IDC 110/Krone termination system for transmission channels of Class E. It supports Gigabit Ethernet (IEEE 802.3ab) applications and is suitable for PoE/PoE+.

CAT.6 CCS 16 -port patch panel, preloaded with 16 shielded RJ45 jacks with IDC 110 termination system for transmission channels of Class E. Characteristics meet and exceed CAT.6 – Class E requirements up to 250MHz according to the ISO/IEC 11801 and ANSI/TIA 568.2-D standards. They support Gigabit Ethernet (IEEE 802.3ab) and are suitable for PoE (IEEE 802.3af) applications.